Checking yard hours… Pickups 24/7 for stripouts, night shifts & data centres

Copper pipe, wire & offcuts across Sydney

Copper Scrap Sydney

Copper is usually the most valuable metal in a scrap pile. We sort yours into the right grade, weigh it where you can see the scale and pay you on the spot.

  • Bright, clean & mixed grades
  • Free pickup for copper
  • Weighed in front of you
  • Paid on the spot
Bright stripped copper wire in IBC cages with an A-K Scrap Metal sticker asking to call when full
Clean copper pipe offcuts ready for weighing
Family run since 2003Mortdale yard, pickups Sydney-wide

Copper grades

Three grades of copper, and why they pay differently

Copper is graded by how pure it is when it reaches the scale. The less there is to strip off before it can be melted, the higher the grade. This is how we sort what you bring.

Bright and shiny stripped copper wireTop grade

Bright and shiny

Bare, uncoated copper wire with no solder, paint or tarnish, usually stripped from heavy cable. It is the top copper grade we buy.

Clean copper pipe offcutsPipe & busbar

Clean

Copper pipe, tube, busbar and solid offcuts with nothing attached. Light surface tarnish is fine; brass fittings, solder and insulation are not.

Mixed copper pipe and fittingsStill paid

Mixed or dirty

Copper carrying paint, solder, plaster, fittings or heavy corrosion. It is paid at a lower rate than clean copper, but it is still copper and still worth selling.

Orange high-grade copper cableGraded by type

Insulated copper wire

Wire and cable still in its sheath is graded by how much copper sits inside. Our cable recycling page explains high, mixed and low grade.

Old electric motors collected for recyclingBought whole

Copper inside equipment

Electric motors, compressors and aircon coils all carry copper windings or tube. We buy them as they are, so there is no need to pull them apart.

Where it comes from

Copper turns up on more jobs than people expect

Plumbers, sparkies, HVAC techs and renovators all pull copper out of buildings, and plenty of it ends up in a general waste skip by mistake.

Copper resists corrosion and carries heat and electricity well, which is why it runs through plumbing, wiring, gas lines and refrigeration. When those systems are replaced, the old copper comes out with them. Pipe offcuts from a bathroom renovation, the earth wire from a rewire or a bundle of tube from an aircon changeover can all be sold rather than thrown away.

We buy copper in small and large lots. A bucket of offcuts is easiest to drop at our Mortdale yard during factory hours, where we help you unload. Bigger amounts, or copper spread across a building site, can be collected anywhere in Sydney at no charge, because pickups are free for non-ferrous metals.

  • Water and gas copper pipe, including offcuts
  • Stripped copper wire and bare earth wire
  • Copper busbar from old switchboards
  • Copper gutters, downpipes and flashing
  • Refrigeration and aircon copper tube
Coils of stranded copper wire with green patina in an IBC cage with an A-K stickerA-K Scrap Metal · Sydney

Keep it in grade

What keeps copper in a higher grade, and what drags it down

Most of the gap between clean and mixed copper comes down to what is still attached. A few minutes with a hacksaw or tin snips before we arrive can lift a whole bucket into a better grade.

Helps the grade

  • Cutting brass valves, taps and fittings off pipe
  • Removing steel clips, screws and brackets
  • Pulling lagging and foam insulation off tube
  • Keeping bare wire apart from pipe
  • Storing copper dry and under cover
  • Giving each grade its own bucket or bag

Pulls it down

  • Solder joints and blobs left on pipe
  • Paint, tar or plaster on the surface
  • Brass compression fittings still attached
  • Insulated wire mixed into bare copper
  • Mud, water or rubbish packed inside pipe
  • Steel or aluminium mixed through the load

Before you sell

Four ways to get more for your copper

None of these take long, and they are worth doing on almost any copper load, large or small.

  1. 01

    Cut off the brass

    In a dim shed, tarnished brass fittings can pass for copper, but they are a different metal with a different rate. Cut them off behind the joint and keep them in their own pile. We buy the brass as well.

  2. 02

    Keep pipe and wire apart

    Bare wire, pipe and insulated cable are separate grades. Start a bucket for each at the beginning of a job and you save sorting time on the day, and your best copper is not weighed alongside lower grade material.

  3. 03

    Keep it locked away

    Copper left in an open skip or on the kerb has a habit of disappearing. Store it in a locked shed or site container, or ask us to place a cage on site that we collect when you call.

  4. 04

    Store it dry until there is a worthwhile load

    If you only have a few offcuts, keep them somewhere dry until the pile is big enough for a trip or a pickup. Wet or muddy copper carries extra weight that is not metal and may be graded down. When it is ready, send a photo and we will suggest a drop-off or a collection.

Google reviews

What sellers say about us

M
Mat (audio addiction)Posted on Google

Fifteen out of 10! Picked up my scrap aluminium at premium prices! Extremely quick, weight with photos. And lightning fast payment. Thanks to the guys for a professional service. I'm a printing company in Alexandria.

R
Robert GiovencoPosted on Google

Great service fast, helpful and upfront about pricing.

C
Christina GroganPosted on Google

I cannot recommend Mo and the team at A-K highly enough. Not only did I have a difficult job, but I also had to make an unexpected short notice change to the timings and they were accommodating and understanding of my situation. They were honest, prompt and great value for money!

ExcellentBased on 61 Google reviews

Industrial · Commercial · Residential

Industrial, commercial, residential and data centres.

Small amounts of household scrap or big company loads — every job gets the same attention and efficiency.

Crane lifting a steel boiler onto a semi-trailer Old switchboards and an orange crate loaded on an A-K truck

Factories, plant & demolition

Factory blow-outs, demolition scrap, machine removals and recurring scrap metal pickups. We're prepared to deal with big tonnages and complicated recycling tasks — with cranes, semi-trailers and hooklift bins.

  • Boilers, plant & machinery
  • Switchboards & switchrooms
  • Structural steel & beams
  • Scheduled bin swaps

“Not only did I have a difficult job, but I also had to make an unexpected short notice change to the timings and they were accommodating and understanding of my situation.”

Christina Grogan · Google
Commercial wheelie bins with A-K Scrap Metal stickers A-K truck carrying commercial bins inside the shed

Trades, stripouts & businesses

Electricians, plumbers, HVAC and fit-out crews. We supply commercial wheelie bins, forklift bins and skip bins, swap them on schedule and pick up after hours so your site keeps moving.

  • Cable & copper offcuts
  • Aircon units & compressors
  • Night-shift stripouts
  • Weight photos on request

“Picked up my scrap aluminium at premium prices! Extremely quick, weight with photos. And lightning fast payment.”

Mat, printing company in Alexandria · Google
A-K crew member loading aluminium sheets onto the truck Ute loaded with aluminium scrap

Homes, sheds & renos

Old sheds, hot water systems, gutters, ally windows and garage clean-outs. You don't have to move a muscle — we come to you, weigh it on site and pay you on the spot.

  • Hot water systems
  • Metal sheds dismantled
  • Copper pipe & gutters
  • Old appliances & motors

“Moe and Joe have just come all the way from Mortdale to Wahroonga, and have done a nice job in dismantling our old metal shed, removed a bulky and rusty hot water system, and cleaned away the debris.”

Google review · Wahroonga
A chiller lifted by crane onto a tray truck HV copper cable cut into lengths in a skip

Data centres & comms rooms

Hall refreshes, power and cooling upgrades and full decommissions. We strip, sort and remove the metal to your program, including night shifts while the rest of the site stays live.

  • Power & HV cable
  • Racks & cable tray
  • UPS batteries & switchboards
  • Chillers & CRAC units
Data centre decommissioning

Copper scrap FAQs

Questions about selling copper

Still got a question?We're available 24/7 on the phone. 0403 172 170
What is your copper price today?

Copper is paid per kilogram at the current market rate, and that rate moves with the metal market and with the grade. Call or text 0403 172 170 with a photo and a rough idea of quantity and we will quote on what you actually have.

Do you pick up small amounts of copper?

Pickups are free for copper and other non-ferrous metals anywhere in Sydney. For a handful of offcuts it is often quicker to drop them at our Mortdale yard, or to hold onto them until you have a fuller load. Send a photo and we will suggest the easiest option.

Is copper with solder or paint still worth selling?

Yes. It is graded as mixed or dirty copper instead of clean, so the rate is lower, but it is still copper. Cut off the solder joints and fittings if you have time. If not, bring it as it is.

Should I strip insulated copper wire?

Only if you can do it safely and the cable is heavy enough to make the effort worthwhile, and never burn it. Our cable recycling page covers how insulated wire is graded.

How can I tell copper from brass?

Clean copper is a reddish orange colour and brass is more yellow. Scratch a dull or tarnished surface to see the true colour underneath. Neither metal is magnetic, so a magnet will not separate them, but it will pick out any steel mixed through the load.

Can you leave a cage on site for copper offcuts?

Yes. For building, plumbing and electrical sites we can place a bin or cage and collect it when you call to say it is full.

Book a pickup

Recycle smarter.
Earn faster.

Book a pickup and let us handle the heavy lifting.

Request a pickup

Metals

We'll call you to confirm pricing and timing before we come.

Call Request Pickup