Checking yard hours… Pickups 24/7 for stripouts, night shifts & data centres

Ferrous and non-ferrous metal recycling

Scrap Metal Recyclers Sydney

Steel offcuts, beams and REO, stainless, aircon units, batteries and insulated copper wire. We collect it from homes, sites and factories across Sydney and get it back into use instead of landfill.

  • Ferrous & non-ferrous
  • Licensed & insured
  • Pick up across Sydney
  • Family run since 2003
A mobile crane lifting a steel boiler onto a semi-trailer
Stainless steel sheet offcuts ready for recycling
Mortdale yardDrop off Mon to Sat, Sunday by appointment

Why recycle metal

Metal can be recycled again and again

Metal can be melted down and made into new products many times over, and it keeps the properties that made it useful in the first place.

Paper and plastic tend to degrade a little each time they are recycled, so fresh raw material keeps being added. Steel, aluminium, copper and brass behave differently. Melted and refined, they come back as new sheet, pipe, wire and bar, which means less ore has to be mined and less metal ends up buried.

That is why a skip or council bin is the wrong place for metal. A broken aircon unit, a stack of steel offcuts or a coil of old wire still holds material that can go straight back into manufacturing, and recycling it frees landfill space for waste that has nowhere else to go.

  • Less new ore mined
  • Less metal in landfill
  • Old metal back into new products
  • Paid per kilogram for what you recycle
Stacks of rusty steel plate offcuts in a warehouseA-K Scrap Metal · Sydney

Ferrous and non-ferrous

Two families of metal, handled differently

Scrap is split into ferrous and non-ferrous metal first, because the two are sorted, valued and processed in different ways.

At a glanceFerrous metalNon-ferrous metal
What it isIron-based metal, such as mild steel and cast ironMetal with no significant iron, such as copper, brass, aluminium and lead
Magnet testA magnet sticks firmlyA magnet does not stick
Common scrapOffcuts, beams, REO, plate and iron castingsCopper pipe and cable, brass fittings, aluminium extrusion and sheet, lead-acid batteries
Value per kilogramUsually lower, because steel is plentiful and heavyUsually higher, and graded closely by purity
Pick upFees may apply for steel pick upsFree pick up

Stainless steel sits in between. It is iron-based, but most grades are not magnetic, and it is bought as its own grade, separate from mild steel.

What we recycle

The main metal streams we handle

These are the streams most homes, sites and factories produce. For every grade we buy, see our types of metal page.

Stainless steel sheet offcutsStainless

Stainless steel

Sheet offcuts, sinks, benches, kitchen equipment, pots, cutlery and fasteners. Keep it apart from mild steel so it is weighed as stainless.

Steel bar and offcuts ready for recyclingFerrous

Steel offcuts, beams and REO

Fabrication offcuts, structural beams and reinforcing bar from construction and demolition. A bin on site keeps them out of general waste.

Stacked split-system outdoor aircon unitsAircon

Aircon units

Split systems through to commercial chillers, with certified refrigerant recovery. Our aircon recycling page covers the full process.

A pallet of lead-acid batteriesLead

Lead-acid batteries

Car, truck and forklift batteries. Never put them in a household bin. Store them upright so acid stays inside the case.

Orange high-grade copper cableCopper

Insulated copper wire

High grade, mixed and low grade wire, loose, bagged or caged. The grade depends on how much copper sits inside the insulation.

A bin of e-bike hub motors with copper windingsMotors

Motors and compressors

Electric motors, compressors and e-bike hub motors carry copper windings inside a steel or aluminium case and are bought as their own grade.

Before you load up

What we take, and what we cannot

Most metal from homes, sites and factories is welcome. A few items have to go elsewhere, and general electronics recycling is not something we handle.

Bring it to us

  • Copper, brass and aluminium
  • Stainless steel
  • Steel offcuts, beams, REO and iron
  • Insulated copper wire and cable
  • Electric motors and compressors
  • Aircon units and radiators
  • Switchboards and lead-acid batteries

Please keep it out

  • Radioactive metals
  • Gas cylinders
  • Some electronic metals (ask us first)
  • Computers, TVs, phones and other general electronics
  • Rubbish mixed through the metal

Where to try instead

  • Gas cylinders: your gas supplier or council drop-off
  • Electronics: a council e-waste day or e-waste recycler
  • Not sure? Send us a photo first

From your site to new metal

What happens after the truck leaves

Sorted by type and grade

Recycling starts with sorting. Metal is separated into ferrous and non-ferrous, then into grades: bright copper from mixed copper, clean brass from fittings, high-grade cable from low-grade. Clean, well-sorted metal is easier for processors to use, which is why we take care over grading and explain any grade we give you.

Melted down and made new

Sorted metal goes on for processing, where it is shredded or baled, melted, refined and cast or rolled into new material. Steel offcuts become new steel. Copper wire becomes new copper. The less contamination a load carries, the more of it is recovered.

Industrial offcuts add up

Fabrication shops, builders and manufacturers produce a steady stream of offcuts, beams and REO that too often goes into general waste. A dedicated metal bin keeps that material out of landfill and turns it into a return. Keep steel and non-ferrous bins side by side and the sorting takes care of itself.

Recycling with A-K

Recycling that pays, without the hassle

Family run since 2003, our approach is simple: come to you, weigh in the open and pay on the spot.

Pick up anywhere in Sydney

Free for non-ferrous metal. Fees may apply for steel, and we tell you before we come.

Drop off in Mortdale

Bring it to 18 Barry Ave, Mon to Fri 7am to 4pm or Sat 7am to 2pm. We help you unload.

Open weighing

Every metal is weighed in front of you, with photos of the scale on request. No underpayment, no overweighting.

Paid on the spot

At current market rates per kilogram for each metal and grade.

Licensed and insured

We hold all the permits and licences required to operate as a metal recycler.

24/7 phone support

Questions about a load or a collection? Ring 0403 172 170 any time.

Google reviews

What customers say

M
Mat (audio addiction)Posted on Google

Fifteen out of 10! Picked up my scrap aluminium at premium prices! Extremely quick, weight with photos. And lightning fast payment. Thanks to the guys for a professional service. I'm a printing company in Alexandria.

C
Christina GroganPosted on Google

I cannot recommend Mo and the team at A-K highly enough. Not only did I have a difficult job, but I also had to make an unexpected short notice change to the timings and they were accommodating and understanding of my situation. They were honest, prompt and great value for money!

M
mia sisicPosted on Google

Wouldn't recommend anyone else except these guys, they offer the best rates and best service! Props to Moe and Joe for their hard work and never disappointing us.

ExcellentBased on 61 Google reviews

Metal recycling FAQs

Questions about recycling metal

Still got a question?We're available 24/7 on the phone. 0403 172 170
What is the difference between ferrous and non-ferrous metal?

Ferrous metals contain iron, so steel and cast iron are ferrous and a magnet sticks to them. Non-ferrous metals such as copper, brass, aluminium and lead contain no significant iron. They are usually worth more per kilogram, and their pick up is free.

Do you recycle electronics?

We do not handle general electronics recycling, so computers, TVs and phones need to go to an e-waste service. We do take electrical items that are mostly metal, such as electric motors, compressors, switchboards and cable.

Can you take steel beams and REO from a building site?

Yes. We collect offcuts, beams and REO from construction and demolition sites and can place bins on site. Fees may apply for steel pick ups, so tell us the rough quantity when you call.

Which batteries do you take?

Lead-acid batteries, such as car, truck and forklift batteries. Keep them upright and do not stack them loose. For other battery types, ask us before you bring them in.

Is stainless steel ferrous or non-ferrous?

Technically ferrous, because it is an iron-based alloy, but most grades are not magnetic and stainless is bought as its own grade. Keep it separate from mild steel so it is not weighed in as steel.

Can I drop metal off myself?

Yes. Our yard at 18 Barry Ave, Mortdale is open Monday to Friday 7am to 4pm and Saturday 7am to 2pm, with Sunday by appointment. We help you unload and weigh everything in front of you.

Book a pickup

Recycle smarter.
Earn faster.

Book a pickup and let us handle the heavy lifting.

Request a pickup

Metals

We'll call you to confirm pricing and timing before we come.

Call Request Pickup