FerrousSteel off-cuts
Plate, angle, flat bar and fabrication off-cuts from workshops, factories and building sites.
Ferrous and non-ferrous scrap, Sydney-wide
Copper, brass, cable, aluminium, stainless, steel, batteries and old AC units all have a buyer here. Find your metal, see how we grade it and learn what keeps it in the higher grade.


What we buy
Every load we weigh starts with one question: does the metal contain iron?
Ferrous metals, such as mild steel, REO and cast iron, are based on iron. They are strong, plentiful and usually paid at a lower rate per kilo. Non-ferrous metals, such as copper, brass, aluminium and lead, contain little or no iron, do not rust in the same way and are usually worth considerably more. Stainless steel sits in between: it contains iron, but its nickel and chromium content means it is graded and paid on its own.
Within each family, the grade matters as much as the metal. Clean, sorted material can go straight to a smelter or mill, while mixed or contaminated scrap needs extra handling first, so it is paid at a lower grade. The explorer and table below show the grades we sort into and what each one usually looks like.

A-K Scrap Metal · SydneyGrades explained
The purer and better sorted the metal, the higher the grade. These are the non-ferrous grades we sort into most often, with the places they usually come from.
| Metal and grade | What it usually looks like | Common sources |
|---|---|---|
| Copper: bright and shiny | Bare, uncoated copper wire with no solder, paint or tarnish | Stripped heavy power cable |
| Copper: clean | Copper pipe, tube or busbar with fittings and insulation removed | Plumbing, gas fitting and switchboard work |
| Copper: mixed or dirty | Copper with solder, paint, plaster, fittings or heavy corrosion | Renovations, demolition and old plumbing |
| Brass: clean | Solid brass with no steel, plastic or chrome-plated parts attached | Valves, fittings and machined offcuts |
| Brass: mixed | Brass with chrome plating, steel screws or other metals still attached | Taps, tapware and plumbing fittings |
| Copper insulated wire: high, mixed and low grade | Cable still in its sheath, graded by how much copper sits inside the insulation | Electrical fit-outs, rewires and stripouts |
| Aluminium: extruded | Window and door frame sections, profiles and channel, free of glass, rubber and steel | Window replacements, shopfitting and fabrication |
| Stainless steel: domestic | Non-magnetic stainless such as sinks, benchtops and kitchen equipment | Kitchen and laundry renovations, commercial kitchens |
Steel and iron are graded separately. Copper and cable each have their own page with more detail on their grades. On the day, you see which grade each pile goes into before it is weighed.
Sort it yourself
You do not need special gear to sort scrap. A fridge magnet, a file or screwdriver and a few buckets will do most of the work.
Hold a magnet against the metal. If it sticks firmly, it is steel or iron. Copper, brass, aluminium and most stainless steel will not hold a magnet, so they belong in your higher value pile.
Old metal often looks grey, brown or green on the surface. Scratch through it with a file or screwdriver: copper shows reddish orange, brass shows yellow and aluminium shows a bright silvery white.
Aluminium is much lighter than steel or stainless of the same size. If a silver-coloured piece feels light for its size and a magnet will not stick, it is probably aluminium.
Look for steel screws in brass, rubber seals in aluminium frames and plugs on cable ends. Removing them, or keeping those pieces aside, stops them pulling the rest of the load down a grade.
A mixed bin is usually graded by its lowest material, so good metal gets paid at a lesser rate. Separate containers for copper, brass, aluminium, stainless and steel also make the weighing faster.
Steel and other scrap
Not everything fits a neat non-ferrous grade. These items are bought by type instead of purity.
FerrousPlate, angle, flat bar and fabrication off-cuts from workshops, factories and building sites.
FerrousStructural beams, columns and reinforcing bar from demolition and construction. Heavy sections are loaded with a hiab truck or crane.
Mixed metalsSplit system outdoor units, ducted plant and commercial chillers carry copper, aluminium and steel. Larger removals are covered on our aircon recycling page.
LeadCar, truck and backup power batteries. Keep them upright and intact so the acid stays inside.
Mixed metalsElectric motors and compressors are bought whole for the copper windings and steel inside them.
Mixed metalsOld switchboards from upgrades and stripouts, which often hold copper busbar and other recoverable metal.
Google reviews
Great customer service, would definitely be back 👌 thanks boys
Fifteen out of 10! Picked up my scrap aluminium at premium prices! Extremely quick, weight with photos. And lightning fast payment. Thanks to the guys for a professional service. I'm a printing company in Alexandria.
Moe and Joe have just come all the way from Mortdale to Wahroonga, and have done a nice job in dismantling our old metal shed, removed a bulky and rusty hot water system, and cleaned away the debris, so now I am a happy customer!
ExcellentBased on 61 Google reviews
At a glance
If your item is not listed here, send a photo. Plenty of things contain recyclable metal even when they do not look like scrap.
Our process
Call 0403 172 170 or send photos. We work out what you have, roughly how much there is and how we will get it out.
We grade the metal and give you a fair quote at current market rates before anything is loaded.
We come to you with the right truck or bin, do the heavy lifting and weigh everything on the spot.
You are paid on the spot. The metal is sorted by grade and sent on for recycling, not landfill.
Metal types FAQs
Stainless contains iron, so strictly speaking it is a ferrous alloy. In the scrap trade it is graded on its own because of its nickel and chromium content, and it is usually worth more than ordinary steel. Most domestic stainless, such as sinks and benchtops, will not hold a magnet.
We buy lead-acid batteries, such as car, truck and backup power batteries. Keep them upright, intact and with the caps on. Check with us before bringing any other type of battery.
Pickups are free for non-ferrous metals. Steel is heavy and lower in value, so a fee may apply for steel pickups. We let you know when we quote, before anything is booked in.
Yes. Bring it to our Mortdale yard during factory hours and we help you unload it and sort it into grades. Splitting it into buckets before you arrive saves time and keeps your better metal from being weighed with lower grade material.
Yes. AC units are on our list, from a single split system to commercial chillers. Larger plant needs refrigerant recovery and lifting gear, which our aircon recycling page covers.
We do not accept radioactive metals, gas cylinders or some electronic metals, and we do not handle general electronics recycling. If you are unsure about an item, send a photo first.
Book a pickup
Book a pickup and let us handle the heavy lifting.