Short answer
To sell scrap metal in Sydney, sort it by metal type, check the yard buys what you have, then drop it off or book a pick up. A good scrap yard grades your metal in front of you, weighs it openly and pays you on the spot at the current market rate. A-K Scrap Metal takes drop offs at our Mortdale yard and collects anywhere in Sydney, free for non-ferrous metal.
What scrap metal can you sell?
Most metal that comes out of a house, a workshop or a building site has a buyer. Scrap yards split it into two families. Non-ferrous metals, such as copper, brass and aluminium, contain little or no iron and are usually worth the most. Ferrous metals, such as steel and iron, are worth less per kilo but are still bought by weight.
What we buy
- Copper: bright and shiny, clean, and mixed or dirty
- Brass: clean and mixed, including taps and fittings
- Copper insulated wire and cable: high grade, mixed and low grade
- Aluminium: extrusions such as window frames, and sheet
- Stainless steel, lead and lead-acid batteries
- Electric motors, compressors, radiators and switchboards
- Air conditioning units, from split systems to commercial chillers
- Steel off-cuts, beams and REO, plus iron
What we cannot take
We do not accept radioactive metals, gas cylinders or some electronic metals, and we do not handle general electronics recycling. If you are unsure about an item, text a photo to 0403 172 170 before you load it. Our page on the types of metal we buy shows each grade in more detail.
Sort your scrap before you sell it
Sorting is the simplest way to get a better result. Yards pay by grade, and a mixed bin is usually graded by its lowest material. A few buckets and a fridge magnet are enough to keep your copper paid as copper.
Quick sorting checks
You do not need to strip everything. If something is hard or unsafe to take apart, leave it whole and we will grade it as it is. Our guide on how to prepare scrap metal for sale goes through cleaning and stripping in more depth.
- Use a magnet. If it sticks firmly, it is steel or iron and goes in its own pile. Copper, brass, aluminium and most stainless will not hold a magnet.
- Give each metal its own container: copper, brass, aluminium, stainless, cable and steel.
- Keep data cable and thin leads apart from heavy power cable.
- Take off what you safely can, such as steel screws, plastic, rubber seals, plugs and brass fittings on copper pipe.
- Keep it dry and free of dirt, concrete and general rubbish.
- Keep lead-acid batteries upright and intact, away from the other metal.
How to choose a scrap yard in Sydney
Search for a scrap yard near me and you will find plenty of options across Sydney. The closest one is not always the best fit for your load. These are the things worth checking before you hand over your metal, whoever you sell to.
What to look for
We have run our Mortdale yard on those basics since 2003: grade in front of you, weigh in the open and pay on the spot. We are a fully licensed and insured metal recycler, and our customers rate us Excellent on Google.
- Open weighing. You should see the scale and every reading, and be able to photograph it.
- Clear grading. The yard should tell you which grade your metal is going into, and why, before it is weighed.
- Payment on the spot. Once you agree on the figure, you should be paid there and then.
- Licensed and insured. A properly licensed and insured recycler keeps your paperwork, and your site, in order.
- Straight answers on the phone. A good yard will look at a photo and tell you plainly what it buys and what it does not.
- Reviews from real customers. Read what people say about the weighing, the pricing and how they were treated.
Drop off or pick up: which suits your scrap?
There are two ways to get scrap to a buyer: take it to the yard yourself, or have the yard come to you. Which one suits depends on how much you have, what it is and whether you have a way to move it.
If you would rather not lift a thing, our free scrap metal pick up covers non-ferrous metal anywhere in the Sydney area, from the Sutherland Shire and St George to the Northern Beaches, the Hills District and Western Sydney.
| What matters | Drop off at our Mortdale yard | Pick up from your home or site |
|---|---|---|
| Best for | Small to medium loads you can carry in a car, ute or trailer | Heavy, bulky or awkward scrap, large loads and job sites |
| Who does the loading | You bring it in and we help you unload | Our crew loads it, with a hiab truck or crane for heavy items |
| Cost to you | Your own fuel and time | Free for non-ferrous metal; fees may apply for steel |
| Timing | Mon to Fri 7am to 4pm, Sat 7am to 2pm, Sunday by appointment | Booked around you; same day is often possible, and stripouts and night shifts run 24/7 |
| Weighing and payment | Graded and weighed in front of you, paid on the spot | Graded and weighed in front of you, paid on the spot |
| Before you come | Sort it at home so unloading is quick | Send a photo and the address so we bring the right truck |
Same-day pick up depends on your location and the volume of metal. Steel can be dropped at the yard if you would rather avoid a pick up fee.
What to bring when you sell scrap metal
Selling scrap does not take much paperwork, but a few things make the visit quicker.
Your checklist
Showing ID is a normal part of selling scrap, and it helps keep stolen metal out of the trade.
- Photo ID. Most scrap yards ask to see photo ID and keep a record of each sale, so bring a driver licence or similar.
- Your metal, sorted. Separate containers or bags for each metal make unloading and weighing faster.
- Gloves and closed shoes. Scrap has sharp edges, and you will probably want to help unload.
- A secured load. Tie down anything in a ute or trailer so nothing comes loose on the road.
- Business details, if you are selling for a company, so the records show the right name.
What happens at the scale
Whether you drop off or we collect, the steps at the scale are the same. This is how a sale works with us, from arrival to payment.
- We look over the load with you and check for anything we cannot take, such as gas cylinders.
- We sort it into grades and tell you which grade each pile is going into, and why.
- Each grade goes on the scale on its own, where you can see the reading. Ask and we photograph each weight for your records.
- We work out the total from each weight and the current market rate for that grade, and show you the figures.
- If you are happy with it, you are paid on the spot and the sale is recorded.
Why the figure can differ between visits
Rates move with the metal, its quality and the market, so the figure on the day may not match a previous visit. Our guide to scrap metal prices in Sydney explains what moves the price per kilo and how grade affects it.
Selling scrap as a business or tradie
For electricians, plumbers, HVAC contractors, builders and demolition crews, scrap is a steady by-product of the job. On Sydney job sites we often find good copper cable thrown in the general skip because nobody set aside a bin for it. The easiest fix is usually a bin on site that we swap when it fills.
We place commercial wheelie bins, forklift bins, Marrell skip bins and hooklift bins, and run hiab trucks through to semi-trailers for bigger loads. We work on Tier 1 and Tier 2 projects as well as small fit-outs, and pickups for stripouts and night shifts run 24/7. Facility managers and strata and property managers can arrange regular pickups so scrap does not build up in plant rooms or loading docks.
Keep separate bins for copper, cable and steel where you can. A site that sorts as it goes gets each grade paid properly. If your project needs a record of what was collected and recycled, tell us when you book and we will provide documentation.

Steel pick up fees, explained
Pick up is free for non-ferrous metal such as copper, brass, aluminium and cable. Fees may apply when we collect steel. The reason is simple arithmetic: steel is the heaviest and lowest value metal we buy per kilo, so collecting a trailer's worth can cost more in truck time, fuel and labour than the steel brings in.
Ways to keep steel costs down
- Mention any copper, brass, aluminium or cable in the load as well, because it changes how we look at the job.
- Send a photo and the rough quantity, so we can tell you whether a fee is likely before we book.
- If you have a trailer, drop steel at our Mortdale yard yourself and we will help you unload.
- For ongoing steel off-cuts at a site or workshop, ask about a bin we swap when it is full.
Text a photo of your steel and the address to 0403 172 170 and we will tell you before we book.




